This Kinglida nail drill with many accessories is used for manicure, pedicure, acrylic, gel, natural nails,

 dead skin, and cuticles removal and so on, the multifunctional nail drill can really save your money for you. 

which is the best helper for nail lovers.

How to change the bits:

1. Please unplug the connector.

2. Choose the drill head you want.

3. Insert the drill head into the spacing.

4. Pull out the drill head after use.

How to choose proper bit:

Needle bit: nail carving, nail corner filing;

Bullet bit: remove the small protrusion on nail surface;

Conical bit: polish the nail cutting edge. The better gradient is easier for nail polish remove and smooth;

Cylindrical bit (small): basic filing on small nails, grinding thick dead skin;

Cylindrical bit (large): basic filing on small nails, grinding thick dead skin;

Sand bands holder (biggest): insert into sand bands

Nail art brush: clean your nail on the surface.

Specification:

Input Voltage Range:110V/50-60Hz

Output Voltage: 12V DC

Speed: 0-20,000RPM

Package List:

1 * professional nail drill

100 * sanding bands

6 * optional nail bits with 6 sanding bands

1* nail art brush

How to maximize the service life for this nail drill:

1. To extend the machine life, please turn off power when changing nail bits.

2. Do not change the turning directions frequently, in order to avoid the handpiece being damaged.

3. While using, please adjust the speed gradually, do not adjust speed suddenly.

4. To prevent overheating less than 20 minutes of continuous use each time.

5. Don\'t rotate to open the drill body, that will damage the machinery.